- Home
- Choose Your Klip
- About Klevaklip
- Deck Building Products
- Snap-Loc for Modwood® Decking
- Snap-Loc for Trex® Decking
- Merbau Clips
- KLEVAKLIP Installation Guides
- Contact us
- Online Shop
KlevaKlip is a multi-board, fixed-pitch decking system that provides consistent gapping (6mm) between the boards. The new Snap-Loc clips allow the boards to be snapped by the weight of someone “walking the board into the clip”. The teeth of the clip flex, allowing the board to insert into the clip, then “snap” into the groove of the board, locking it in place. Made from engineering polymer, the Snap-Loc clip is built to last the life of your deck.
Suits 137mm Xtreme Guard® or Natural Grain Collection Decking
KlevaKlip is a multi-board, fixed pitch decking system that provides consistent gapping (6mm) between the boards. The new Snap-Loc clips allow the boards to be snapped into the clip by the weight of someone “walking the board into the clip”. The teeth of the clip flex, allowing the board to insert into the clip, then “snap” into the groove of the board, locking it in place.
Made from engineering polymer, the Snap-Loc clip is built to last the life of your deck.
90MM MERBAU GALVANISED CLIP
The KlevaKlip “Merbau clip” has been designed to suit the size, hardness, density and shrinkage rates of 90mm kiln dried merbau/kwila. It is not designed for use with other timbers.
The KlevaKlip merbau clip allows you to purchase and use decking boards “off the shelf” without the need for deep grooves in the sides of the boards which are not only expensive and time-consuming, they can in some cases affect the integrity of the side edges of the boards.
90MM MERBAU STAINLESS STEEL CLIP
The KlevaKlip “Merbau clip” has been designed to suit the size, hardness, density and shrinkage rates of 90mm kiln dried merbau/kwila. It is not designed for use with other timbers.
The KlevaKlip merbau clip allows you to purchase and use decking boards “off the shelf” without the need for deep grooves in the sides of the boards which are not only expensive and time-consuming, they can in some cases affect the integrity of the side edges of the boards.
The Top-Fix Traditional Metal clips are mainly used for Bushfire-rated areas when using ModWood's 137mm Flame Shield® decking. They suit Timber Joists, Kiln Dried Hardwood Joists, Lysaght Firmlok Metal Joists, Metal RHS joists and C Purlins and is Top fixed into the joists. Available in galvanised steel or optional stainless steel to suit 88mm x 23mm, 137mm x 23mm or 137mm x 32mm (Marina) Modwood Natural Grain Collection (groove on Edges) For H3 Laminated Veneer Lumber (LVL) joists please check with your supplier for suitability. F14 unseasoned hardwoods are not to be used due to their high shrinkage rates.
The Top-Fix Traditional Metal clips are mainly used for Bushfire-rated areas when using ModWood's 137mm Flame Shield® decking. They suit Timber Joists, Kiln Dried Hardwood Joists, Lysaght Firmlok Metal Joists, Metal RHS joists and C Purlins and is Top fixed into the joists. Available in galvanised steel or optional stainless steel to suit 88mm x 23mm, 137mm x 23mm or 137mm x 32mm (Marina) Modwood Natural Grain Collection (groove on Edges) For H3 Laminated Veneer Lumber (LVL) joists please check with your supplier for suitability. F14 unseasoned hardwoods are not to be used due to their high shrinkage rates.
KlevaKlip is a multi-board, fixed-pitch decking system that provides consistent gapping (6mm) between the boards. The new Snap-Loc clips allow the boards to be snapped by the weight of someone “walking the board into the clip”. The teeth of the clip flex, allowing the board to insert into the clip, then “snap” into the groove of the board, locking it in place. Made from engineering polymer, the Snap-Loc clip is built to last the life of your deck.
No data found. Please select a different combination.