KlevaKlip Systems Pty Ltd - About us

About KlevaKlip

about klevaklip

KlevaKlip Systems Pty Ltd is an Australian owned company originally set-up to provide concealed fixing systems for decking materials. Over a period of time, the company has diversified to provide products that may fill niche markets in the building products industry.

KlevaKlip - (patent no. 2007278768) The clever clip fixing system


KlevaKlip is a multi-board concealed fixing clip. Working on a "fixed pitch" principle, the clip provides a consistent finish that is obtained without the use of nails or screws. KlevaKlip's cleverly designed teeth will simply lockboards into place, leaving no unsightly screw or nail holes.

The KlevaKlip clever fixing system allows for fast and simple installation. There are two different types of clips available - one to suit 90mm Merbau hardwood and one to suit ModWood composite deck boards (either 88mm or 137mm boards), providing the DIY or expert a professionally finished project.

If you are looking for a smooth deck surface that highlights the natural beauty of timber and looks and feels sensational then the answer is KlevaKlip.

 ModWood Brochure        Merbau Brochure


Snap-LOC Clip - (patent pending)

The KlevaKlip Snap-LOC clip is a multi-board, fixed pitch decking system that provides consistent gaping between the boards. The new Snap-LOC clips allow the boards to be snapped into the clip by the weight of somewon " walking the board into the clip". The teeth of the clip flex, allowing the board to insert into the clip, then "snap" the board into the groove of the board, locking it into place.

Made from engineered polymer, the Snap-LOC clip is built to last the life of your deck.

 Snap-LOC Brochure

Adjustable Joist Supports - ( Australian patent no 2012261552 - United States of America no 14/098253)

The KlevaKlip Adjustable Joist Support has been developed specifically for the use of installing decks over concrete slabs - a market that until now has been barely catered for, with builders having to make up different types of brackets and packers to try and set their joists at even heights over rough or uneven surfaces.

 Joist Supports Brochure

FREP Joist Hanger (Fibre Reinforced Engineered Polymer) -                       (Australian patent no 2016200576 - United States of America 15/146440)


Manufactured from Fibre Reinforced Engineering Polymer (FREP) the FREP will work in any harsh environment.  

 FREP Brochure

Adjustable Bearer Supports - (patent 2014100056)

The clever people from KlevaKlip have now released the Adjustable Bearer Support – aimed at the section of the market where decks are typically from 300 to 600mm off the ground.

 Bearer Supports Brochure

Joist Connector - ( patent pending)

The Joist Connector provides a positive connection between joist and bearer and is available to suit 90mm, 70mm & 45mm bearers to 45mm Joists. Manufactured from Nylon 6 Engineering Polymer, the Joist Connector will not rust, separates both Joist & Bearer and prevents moisture- initiated degradation caused by skew nailing.

 Joist Connector Brochure

Copyright © 2018 KlevaKlip Systems Pty Ltd